Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the flexibility of gas cooktops but requires an oven for baking? Find a dual fuel cooker that gives you the best of both worlds.
Gas cooktops are favored by many home chefs who have years of experience in the kitchen due to their superior temperature control. They also allow them to utilize advanced cooking techniques, such as charcoaling. These powerful stoves can be costly particularly if they need an additional gas connection as well as an electrician for installation.
What is a 13amp plug?
If you own a dual-fuel range cooker (also known as a gas and electric oven), you will need a 13 amp plug. The plug also needs to be wired in the cooker circuit ring by a qualified electrician.
This ensures that the current flowing through the plug is secure and not too high which could create an electrical fire risk. The plug has an electrical fuse that regulates the current. The fuse explodes whenever the current passes through it beyond its capacity. This protects the appliance from an over-charge of electricity.
The fuse is listed at 13 amps as indicated on the top of the plug. this is the maximum amount of current that the plug can pass without causing harm to the appliance or overheating the socket. It is crucial that when replacing fuses you always use the same amps as the original. You run the risk of overheating the socket if you replace a fuse with an unrelated rating.
Ceramic 13 amp fuse are extremely robust and can withstand high temperatures from a range cooker. Ceramic elements are also fire-resistant, and is therefore a better option than other kinds.
There are a few different ways in which 13 amp plugs can be connected. The plug can be connected to a live socket by using screws or a plastic jaw cord clamp. The plug must be put in place with a firm push and then tightened, ensuring that the clamp is secure.
Before connecting the wires, you may have to remove the wiring diagram on cardboard that is placed over the pins of certain plugs. The wires should be cut to the proper length, as when they are too long they may be crushed when the plug covers are replaced. The earth wire should be the longest wire to ensure it is connected before the line and neutral pins.
How do I connect a 13amp plug?
The vast majority of dual fuel range cookers in the UK are wired to 13 amp plug sockets and this is crucial as ovens can draw a considerable amount of power and standard plug sockets are only capable of 10 amps.
Generally speaking, new appliances must be fitted with plugs at the time of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances might not have a plug and this is where the problem arises.
When connecting the cooker to an existing plug socket, the first thing to do is to check that the rating of the fuse inside the fuse box matches the plug's rating. This is crucial as an incorrectly sized fuse could pose a risk.
It is also recommended to check that the fuse is fully seated in the cartridge, and there isn't any excessive movement. The next step is to prepare the flex that is to be used. Remove the sheathing from the flex to expose the three insulated conductors within. Next nick the sheathing at the entry point to the plug (beyond the cord grip) with a utility knife, but without damaging the individual insulated conductors. This nick must be large enough to allow the cable and sheathing to separate when the sheathing is pulled back. Finally, cut off the excess sheathing and leave about 40mm over the flex end.
The flex is positioned over the plug and the earth terminal is placed at the top and the neutral and live terminals at the bottom. Using the conductors with the colors to guide you, the sheathing is then removed from each pin and the internal cable is then plugged into the appropriate terminal using the cord grip. If the plug is fitted with a screw-type cord clamp loosen it, and then pull back the insulation to expose the copper conductors. Connect each conductor that is insulated to the correct terminal (starting with the earth, then neutral and finally the live) using the channel they are running through the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw for a 13amp plug at 230volts is 3kw. This is a significant amount of power, but the standard fuse fitted in a UK plugtop will not fail until the cable has reached to a dangerous level. A damaged plug or socket could cause fire, therefore it is important to keep an eye on how much you are using, especially in the kitchen.
The ceramic fuses used in plugtops are approximately 25mm and are suitable for 240V mains. Read Home will have an BS Kitemark or similar mark on the side, and they'll contain sand. Plastic or glass alternatives are available, but should never be used in conjunction with live plugs.
Most dual fuel range cookers sold in the UK require hard-wired and are not able to plug directly into the wall socket. They are usually connected to a specific cooker ring circuit that is suitable for appliances that use up to 20 amps.
You can check the ring circuit of your home by checking the fuse box or asking an electrician nearby. They will be able to inform you if the sockets within your home are on the same ring, or if they are separate and whether there is a separate circuit for your oven.
When you're looking to buy a brand new dual fuel range cooker, the size of your kitchen is a vital factor to take into account. We have a large selection of cookers to suit any space, from compact 50-60 cm dual fuel models, as well as massive 90cm+ double oven options from the top brands such as Rangemaster and StovesAreUs.
We also have a broad selection of multi-function electric and gas cookers. These multi-functional appliances allow you to cook a variety of meals, such as pasta, casseroles, and curries.
Currys offers a wide range of Cookers. Explore our online collection or stop by our store to view them. We provide free home delivery and installation on selected range cookers, and also flexible payment options. Our team is on hand to answer any questions you have. You can contact us via email or by phone. Credit is subject to status, and terms & conditions apply.
What is the maximum current draw of the cooker switch?
There is lots of confusion regarding what the maximum current draw of a cooker's switch is. Most cookers are hard-wired and connected to a specific oven-ring circuit not an ordinary socket. This is due to the fact that they often draw more than 20 amps of power when the electric oven and gas hob are in use.
There aren't any dual fuel range cookers that are able to be fitted in a standard socket, since this could pose an enormous fire risk and infringe electrical regulations. A licensed electrician will install any new electrics to a cooker in the kitchen, and they will ensure that the total load (both the hob and oven) do not exceed the supply capability of the circuit.
The benefits of a dual fuel range cooker are the receptive heating of a gas cooktop and the precise operation of an electric oven. They are adored by chefs as well as home cooks. Dual cookers with fuel ranges are ideal to experiment with different cooking techniques, like searing or grilling.
When you are looking to purchase a new range cooktop, you must be aware of a number of aspects such as size, function and price. You will also need gas connections in your home to connect the appliance. If you're not sure, it is best to make an appointment with an appointment with a Gas Safe engineer to inspect your property before installation.
Currys' dual fuel range cookers come with a variety of models that will fit all budgets. From affordable models by Indesit and Zanussi to our own Essentials collection. If you're looking for something bit more sophisticated We also have a wide selection of premium JennAir ranges, featuring a number of unique features.
It is crucial to read the user's manual before purchasing a dual fuel range cooker. This will provide specific information about the gas and electrical requirements. You will need an electric connection to your home. A plumber may be required to connect it for you. You might also require a dedicated cooker-ring circuit, installed by an experienced electrical engineer.